Optimum THERMOCOOK PRO M User Manual page 12

HOW TO USE THE STEAMER:
The steamer is perfectly suited for preparing some food such as vegetables with meat, sausages,
steamed bread, steamed fish etc.
You can use the steamers in either of the following two combinations:
Combination 1: Lid (M)+ steamer (Tray) (N) + Steamer (O)
Use this combination for cooking different foods.
Combination 2: Lid (M) + Steamer (O)
Use this combination for larger amount of the same food, e.g. vegetables, potatoes or large pieces of
meat or sausages.
Please follow the steps:
1. Install the blade, and then install the bowl on the main appliance.
2. Add the water (0.5L≤water≤2L) in the bowl. (Caution: The water in the bowl should be more than
0.5 litres. 0.5L water can be used for steaming food for 30 minutes.)
3. Put the airproof ring on the bowl lid, and then cover the bowl lid.
4. Turn the bowl lid until it is locked in position.
5. Put on the steamer.
6. Put the food on the steamer, and then cover the lid.
7. Plug in and press "On" button.
8. Set the speed (1), the time and the temperature you need.
9. Press "Start/Stop" button, the appliance starts to working and the timer is counting down.
10. Sound "Beep" will be heard while the working time is left 5 seconds.
11. When the time is up, the appliance stops running and "Start/Stop" button light keeps flashing.
"Start/Stop" button light will be out if you don't perform any operation in 5 seconds. All the
settings are cleared.
12. After use, turn the main appliance off and remove the steamer lid.
13. Take out the processed food from the steamer.
10