Lvds; P1100 "Lvds - Beckhoff CB3053 Manual

Chapter: Connectors

4.8 LVDS

The board also offers the possibility to use displays with LVDS interface. These can be connected via a 30
pin flat-cable plug (JAE FI-X30S-HF-NPB, mating connector: FI-X30C(2)-NPB). Only shielded and twisted
cables may be used. The display type is to be chosen over the BIOS setup. The connector has two
additional shield pins S1 and S2 which are omitted in the pinout table below.
Pinout LVDS connector:
Name
Pin
1 TXO00#
2 TXO00
3 TXO01#
4 TXO01
5 TXO02#
6 TXO02
7 GND
8 TXO0C#
9 TXO0C
10 TXO03#
11 TXO03
12 N/C
13 N/C
14 GND
15 N/C
16 N/C
17 GND
18 N/C
19 N/C
20 N/C
21 N/C
22 N/C
23 N/C
24 GND
25 3.3V
26 DDC_CLK
page 26
LVDS even data 0 -
LVDS even data 0 +
LVDS even data 1 -
LVDS even data 1 +
LVDS even data 2 -
LVDS even data 2 +
ground
LVDS even clock -
LVDS even clock +
LVDS even data 3 -
LVDS even data 3 +
reserved
reserved
ground
reserved
reserved
ground
reserved
reserved
reserved
reserved
reserved
reserved
ground
3.3 volt supply
EDID clock for LCD
Description
Beckhoff New Automation Technology CB3053
LVDS