Setting Drying Time - SciCan STATCLAVE G4 Service Manual

Biological Indicator/Spore test results are available at a different time than chemical indicators but you still
have the option to add the BI/Spore test results to the documentation report when these results are
available.
On the home screen, the STATCLAVE G4 will indicate a result is pending by showing this icon:
Pressing this button will lead you to a screen that allows you to input the Biological Indicator results.

Setting drying time

Use this setting to lengthen or shorten drying times on selected cycles. The default drying times for each
cycle are preset to provide optimal drying of a maximum load. Smaller loads may require shorter drying
times. If you have shortened the drying time of a cycle to less than the default setting, you must check the
load for dryness.
48