Setting The Time; Setting The Date; Setting The Language - SciCan statim 2000 G4 Operator's Manual

3 Setting up your STATIM

3.6 Setting the Time

1.
2. Scroll to
3.
From the TIME screen, use the keypad to set the time. Press
to return to the Setup menu.
4.
To change your unit to display 12-hour time format (24-hour time format is the default
setting), go to the Setup menu and use
toggle to 12. Press
5.
To activate daylight savings time (DST), which is recommended if you have connected
your unit to a network, go to the Set up menu and use
and select. Use
Setup menu.

3.7 Setting the Date

1.
2. Scroll to
3.
From the DATE screen, use the keypad to set the date. Press
to return to the Setup menu.
4.
To change the format in which the date appears, return to the Setup menu and use
the date displayed in the desired format. Press
the Setup menu.

3.8 Setting the Language

The messages displayed by your STATIM can be presented in a number of different
languages. To change the current language, follow these steps:
1.
2. Scroll to
3.
From the LANGUAGE screen, press
When you have found the desired language, press
to the Setup menu.
and select.
Time
to save and return to the Setup menu.
to toggle DST ON or OFF and press
and select.
Date
to scroll to DATE FORMAT. Select it, and follow the prompts to have
and select.
Language
to scroll to TIME 12/24, select it and
to save and return to
to scroll through the list of languages.
Page 15
to save and
EN
to scroll to DST ON/OFF
to save and return to the
to save and
EN
to save your selection and return