Table of Contents
Advertisement
Description
See Figure 1. The Auto-Flo RT gun is designed for use
as a material outlet valve on an SDS Meter. It can be
wired for 120- and 240-volt circuits.
The Auto-Flo RT gun can be configured with a QUISS
RTVision sensor head to provide continuous monitoring
of the material bead during the application process.
Refer to Table 1 for the specifications.
Figure 1
Auto-Flo RT Gun
Table 1 Specifications
Item
Normal Operating
Temperature
Maximum Seal
Operating Temperature
Maximum Fluid
Operating Pressure
Maximum Air
Inlet Pressure
Actuating
Air Pressure
Air
Quality
Air
Usage
Dimensions Mounted to an
SDS Meter with QUISS
RTVision Sensor
Head Installed
Note: Specifications are approximate.
E 2008 Nordson Corporation
Specification
150 _F
(65.5 _C)
200 _F
(93 _C)
3000 psi
(206 bar)
120 psi
(8 bar)
60--120
(4--8 bar)
Oil-free and filtered
through 5-micron or
finer particulate filter
0.04 scfm
3
(0.0012 m
)
See Figure 2.
32.92 in.
(83.6 cm)
7 in.
(17.8 cm)
3.15 in.
(8 cm)
Figure 2
Typical Dimensions
3
Auto-Flo RT Gun
7 in.
(17.8 cm)
QUISS RTVision
SENSOR HEAD
2.63 in.
(6.6 cm)
Part 1074874A--02
Advertisement
Table of Contents
