Page 1
See Figure 1. The control module (2) provides the pneumatic operating functions for Rhino SD2/XD2 bulk unloaders (1). See Figure 2 and refer to Table 1 for a list of the control module components. Figure 1 Rhino SD2/XD2 CE Control Module Part 1087765-02 E 2019 Nordson Corporation...
Page 2
Rhino SD2/XD2 CE Two-Hand Operation Control Module Figure 2 Control Module Components Part 1087765-02 E 2019 Nordson Corporation...
Page 3
Neutral position to perform maintenance, or when it is not in use for long periods of time. When performing maintenance, make sure that the ram and follower plate is on the bulk unloader base or secured using support blocks. Part 1087765-02 E 2019 Nordson Corporation...
WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. NOTE: Read and understand the Safety section in the Nordson System Documentation that shipped with the system before installing the control module.
Rhino SD2/XD2 CE Two-Hand Operation Control Module Parts To order parts, call the Nordson Customer Service Center or your local Nordson representative. Control Module See Figure 4 and the following parts list. 6 IN. (15.5 CM) 53 IN. (135 CM)
S SCREW, hex, 3/8-16 x 0.750, grade 5, per ISO 4018 1606745 8 ft S TUBING, 5/16 OD, nylon, flame resistant, blue NOTE A: Refer to the Controls parts section for detailed parts information. Part 1087765-02 E 2019 Nordson Corporation...
Page 7
Rhino SD2/XD2 CE Two-Hand Operation Control Module This page intentionally left blank. Part 1087765-02 E 2019 Nordson Corporation...
Page 8
Rhino SD2/XD2 CE Two-Hand Operation Control Module Controls See Figure 6 and the following parts list. Figure 6 Controls Parts Part 1087765-02 E 2019 Nordson Corporation...
Page 9
1082187 S CONNECTOR, male, 6 mm tube x G⅛ 1082500 S MUFFLER, R⅛ −−−−−− S SCREW, socket, M5 x 40, class 12.9, per ISO 4762 −−−−−− S WASHER, lock, M5, per ISO 7089 Continued... Part 1087765-02 E 2019 Nordson Corporation...
Page 10
S VALVE, relief, 1 bar, 15 psi, ⅜ NPT 1082349 S VALVE, 2-position, 4-way, 24 Vdc, VQC4000 NOTE A: Two-hands down XD2 controls B: B/U two-hands down controls, 125 mm CE AR: As Required NS: Not Shown Part 1087765-02 E 2019 Nordson Corporation...
Refer to Figure 7 for tubing lengths for the control connections. 30 IN. (76.2 CM) 10 IN. (25.4 CM) 11.25 IN. (28.6 CM) 15.5 IN. 4 IN. (39.5 CM) (10.2 CM) Figure 7 Tubing Part 1087765-02 E 2019 Nordson Corporation...
Rhino SD2/XD2 CE Two-Hand Operation Control Module Depressurization Equipped Configuration Part 1087765-02 E 2019 Nordson Corporation...
Page 14
Notice This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2019. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Nordson Corporation. The information contained in this publication is subject to change without notice.