Connecting The Ground Cables To The Rack Grounding Strip; Figure 39 Rack Grounding Strip Example - Nortel Passport 8000 Series Installing And Maintaining

Connecting the ground cables to the rack grounding strip

To connect the chassis ground cables to the rack grounding strip:
1
Locate the shelf grounding point on the rack. This grounding point could be a
grounding strip at the back base, top, or side of the rack.
Note:
grounding strip may look different than the one shown in this example.
2
Attach the lug ends of the chassis ground cables to the rack grounding strip
(Figure 39).
Use a 7/16-inch hex wrench to fasten the hardware in the correct order.

Figure 39 Rack grounding strip example

1
2
3
4
1 = Hex head bolt
2 = Lock washer
Figure 39 shows an example of a rack grounding strip. Your rack
3 = Ground crimp lug
4 = Rack grounding strip
Installing and Maintaining the Passport 8000 Series Chassis
Chapter 3 Installing the 8010co chassis 75
10433FA