Figure 13 Attaching The Rack-Mounting Brackets To The Chassis: 8003 Chassis; Table 7 Number Of Rack Units To Allocate For Chassis - Nortel Passport 8000 Series Installing And Maintaining

46 Chapter 2 Installing the 8010, 8006, and 8003 chassis

Figure 13 Attaching the rack-mounting brackets to the chassis: 8003 chassis

3

Table 7 Number of rack units to allocate for chassis

Chassis
8010
8006
8003
4
316314-E Rev 01
10237FA
Measure the appropriate number of rack units of free vertical space inside the
rack and mark the spot
Holding the chassis in position, align the flanged end of each mounting rail
with two holes on each side of the vertical rack support.
It is easiest to complete this step with two people. Make sure that the hole
pairs on either side of the vertical support match horizontally
page 47, Figure 15 on page
(Table 7).
Rack units
13.2
9.7
6
47, and Figure 16 on page
Inches
23.10
16.9
10.5
(Figure 14 on
47).