Power Supplies; Figure 4 8003 Chassis And Components - Nortel Passport 8000 Series Installing And Maintaining

Slots are numbered from the top down. Slots 1 and 2 allow you to install Passport
8600 interface modules. Slot 3 is reserved for the Passport 8690SF or 8691SF
Switch Fabric Module. For complete information about Passport 8600 modules
and instructions for installing them, see Installing Passport 8600 Series Switch
Modules (312749-J).
The 8003 chassis has two bays for 8003AC power supplies (refer to Installing an
AC Power Supply in a Passport 8000 Series Chassis (312751-D), and a single
8003 fan tray for cooling (refer to Installing a Fan Tray in an 8000 Series Switch
(312752-D).
components in the 8003 chassis.

Figure 4 8003 chassis and components

8600 Series
modules

Power supplies

The 8010, and 8006 chassis each provide three bays for installing power supplies.
The following power supplies are available for these chassis:
•
•
•
•
•
•
The 8010co chassis provides three bays for installing power supplies. The
following power supplies are available for these chassis:
Chapter 1 Passport 8000 Series chassis hardware components 31
Figure 4 also shows the location of customer-replaceable
8001AC Power Supply (discontinued)
8004AC Power Supply
8005AC Power Supply
8002DC Power Supply (discontinued)
8004DC Power Supply
8005DC Power Supply
Installing and Maintaining the Passport 8000 Series Chassis
Fan tray
Power supplies
10932EA