54 Chapter 3 Installing the 8010co chassis
Shipment contents
Inspect all items for shipping damage. If you detect any damage, do not install the
8010co chassis. Call the Nortel Networks Technical Solutions Center in your area
(see
In addition to the 8010co chassis, your shipping container contains several
hardware accessories. Verify that the items in the shipping container match those
on the shipment packing list.
Use
Table 8 8010co chassis shipping accessories
Check Accessory
Antistatic wrist strap
•
One cable adapter
•
One 10-foot console serial cable
Screws and hardware:
•
12 Phillips head screws
•
12 self tapping hex head screws
•
12 clipnuts
•
4 Phillips head screws
•
4 hex nuts
•
4 self tapping hex head screws
•
4 pan head screws
Installation shelf
1 upper cable management bracket
2 side cable management brackets
Bottom bezel
316314-E Rev 01
"How to get help" on page
Table 8
as a checklist when verifying the contents of the shipping container.
21).
Use to
Direct the discharge of static electricity from your body to
the chassis, thereby avoiding discharge to, and possible
damage of, sensitive electronic components.
Connect an optional management console.
NOTE: The hardware required for mounting the chassis in a
rack depends on your rack type.
Mount the chassis to a rack rail.
Mount the chassis to a Hendry rack.
Use the clipnuts if necessary.
NOTE: The hardware required for mounting the installation
shelf in a rack depends on your rack type.
Mount the installation shelf to a rack rail.
Mount the installation shelf to a rack rail.
Mount the installation shelf to a Hendry rack.
Install the cable management bracket.
Eases mounting the 8010co chassis in an equipment rack.
Manage network interface cables.
Manage network interface cables.
Cover the power supplies and separate the chassis air
intake from the power supply air intake.