Brother MFC-5460CN Quick Setup Manual page 15

STEP 2
Installing the Driver & Software
For USB Interface Users
3
(For Mac OS
Note
For Mac OS
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
2
3
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
14
®
X 10.2.4 or greater)
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
4
Note
Make sure that the machine is turned on by
connecting the power cord.
5
Turn on your Macintosh
6
Put the supplied CD-ROM into your CD-ROM
drive.
7
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
8
The Brother software will search for the Brother
device.
9
When this screen appears, click OK.
®
For Mac OS X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 13.
®
Macintosh
®
.