Table of Contents
Advertisement
Required forms
● Bill of lading
● Return document with the following information:
Return document (http://support.automation.siemens.com/WW/view/en/16611889)
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
● Decontamination declaration
Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean the device/
replacement part before returning it, in order to ensure that all hollow areas are free of
hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts which are returned without a decontamination declaration
will be cleaned at your cost before further processing.
The form is available on the Internet.
10.3
Disposal
Note
Environmental protection
The high-performance battery used contains lithium thionyl chloride. The internal components
of the battery must not pollute the environment.
● Do not dispose of the battery in the domestic refuse.
● Make sure that you observe the waste disposal regulations in your country.
Please contact your regional partner concerning the procedure for replacing old batteries. You
can find additional information in the Internet at: Partner
partner)
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
Maintenance and service
(http://www.automation.siemens.com/
10.3 Disposal
65
Advertisement
Table of Contents
