Table of Contents
Advertisement
The decontamination declaration is available on the Internet. You will find the relevant
addresses in Technical support (Page 70).
2.6
Conformity certificate
You will find all declarations of conformity on the supplied CD-ROM.
CE declaration of conformity
A CE declaration of conformity was issued for non-hazardous area versions. This declares that
the WirelessHART adapter meets the relevant EU directives.
Electromagnetic compatibility
All modules are suitable for industrial applications and meet the EU directive 2004/108/EC
"Electromagnetic Compatibility":
● Emission: EN 61326-1: 2006, class B
● Immunity: EN 61326-1: 2006 Tab. 2 (industrial environment) NE21
FCC and IC approval (IC = Industry of Canada)
This device meets Part 15 of the FCC regulations.
Operation is subject to the two following conditions:
● This device cannot cause dangerous interference.
● The device is not sensitive to interference that can cause unwanted operating states.
Changes
The FCC requires that the user is informed of the fact that the authority of the user to operate
the device can become invalidated by any modifications to the device not expressly approved
by Siemens AG.
R&TTE approval
This device meets the directive on Radio and Telecommunications Terminal Equipment
(R&TTE), 1999/5/EC: EN 300328
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
WARNING
Keep to the minimum distance between the device antenna and the human body
A distance of at least 20 cm must be maintained at all times between the body of the user
or other persons in the vicinity whenever the device is in use.
General safety instructions
2.6 Conformity certificate
11
Advertisement
Table of Contents
