Table of Contents
Advertisement
Parameter assignment/addressing
9.3 Wireless communication
to the WirelessHART network. The join key can only be entered with the quick start wizard or
in online mode using the "Wireless settings" device function.
Parameter
Network ID
Wireless mode
Radio output power
Join key part 1 of 4
Join key part 2 of 4
Join key part 3 of 4
Join key part 4 of 4
Network search time [s] Time for active join attempts in s after entering
Join mode
52
Meaning
Identification number of the network to which
the WirelessHART adapter connects.
● Range 0 ... 65535
Display of the join network process of the Wire‐
lessHART adapter.
● Idling
● Active search
● Negotiate: Join parameters are negotiated
with the Network Manager.
● Blocked: Denied by Network Manager and
temporarily excluded from the network.
● In operation: Connection established
● Terminated: Permanent exclusion
● Deep sleep/ultra low power/passive scan:
Inactive
Power of the radio signal.
● 0 or 10 dBm
● National restriction to 0 dBm possible
Network password, 8 characters, format: hexa‐
decimal, part 1 of 4.
Network password, 8 characters, format: hexa‐
decimal, part 2 of 4.
Network password, 8 characters, format: hexa‐
decimal, part 3 of 4
Network password, 8 characters, format: hexa‐
decimal, part 4 of 4.
the correct "join key" and the correct "network
ID".
● Following this, the WirelessHART adapter
continues to attempt to join the network,
however with reduced intensity; the yellow
LED goes off.
The way in which the WirelessHART adapter
joins the network:
● Do not attempt to join: Do not join network
● Join now: Join the network
● Attempt to join immediately on power up or
reset: Join the network immediately after a
restart
Example
43
10 dBm
3600
Attempt to join immedi‐
ately on power up or re‐
set
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
Default
0
10 dBm
3600
Attempt to join immedi‐
ately on power up or
reset
Advertisement
Table of Contents
