Cleaning Mode Selection - ECOVACS DD3G Instruction Manual

Power OFF
7
Pause DEEBOT. Open the robot's Top Cover.
Move the Power Switch to the OFF position.
* When DEEBOT is not cleaning, it is suggested
to keep it powered ON and charging.

3.3 Cleaning Mode Selection

DEEBOT has several cleaning modes to choose from to effectively clean different floors.
Cleaning modes are selected using the Remote Control or ECOVACS App.
1 AUTO Cleaning Mode
This is the most commonly used mode. In AUTO
Cleaning Mode, DEEBOT plans the most efficient
route and cleans in a back and forth straight-line
pattern.
2 Spot Cleaning Mode
(1-5 minutes)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning Mode,
3. Operating and Programming
11
FR-CA
EN