Cleaning Mode Selection - ECOVACS DEEBOT M81Pro Instruction Manual

9 Power OFF
Pause DEEBOT. Press and hold the
the robot. DEEBOT is powered OFF when the
button stops glowing.
* When DEEBOT is not cleaning, it is suggested
to keep it powered ON and charging instead of
powered OFF.
* For models with app-connectivity, various functions can be performed using the ECOVACS App.

3.3 Cleaning Mode Selection

DEEBOT has several cleaning modes to choose from to effectively clean different floors. Cleaning
modes are selected using the Remote Control.
1 AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans
in a straight line and changes direction
when it meets an obstacle.
* To start AUTO Cleaning Mode, press
the AUTO Mode Button on the robot.
3. Operating and Programming
button on
2 Intensive Cleaning Mode
This mode is good for aggressive cleaning
or for extremely dirty or dusty floors. To
start Intensive Cleaning, press the Intensive
Cleaning Button on the Remote Control.
In this mode, DEEBOT follows the same
cleaning pattern as Automatic Cleaning
Mode, but with stronger suction power
and higher Main Brush rotating speed and
performs a more thorough cleaning.
3 3
OFF
11
FR-CA
EN