Cleaning Mode Selection - ECOVACS DEEBOT OZMO 930 Instruction Manual

Power OFF
7
Pause DEEBOT. Open the robot's Top
Cover. Move the Power Switch to the OFF
position to power OFF. "I"=power ON;
"O"=power OFF.
* When DEEBOT is not working, it is suggested
to keep it powered ON and charging.
* For models with app-connectivity, various functions can be performed using the ECOVACS
App.

3.3 Cleaning Mode Selection

DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning
Modes are selected using the or ECOVACS App.
1
AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in a
back and forth straight-line pattern.
2 Spot Cleaning Mode
This mode is applicable for areas of highly concentrated dirt or dust. In Spot Cleaning Mode,
DEEBOT focuses on selected areas to clean. Specific areas on the map can be selected to be
cleaned with Spot Cleaning Mode using ECOVACS App.
3
Area Cleaning Mode
After DEEBOT has scanned and mapped the environment, specific areas on the map can be
selected to be cleaned with Area Cleaning Mode using ECOVACS App.
3. Operating and Programming
15
EN