Cleaning Mode Selection - ECOVACS Deebot Slim Instruction Manual

3.3 Cleaning Mode Selection

DEEBOT SLIM has several cleaning modes to choose from to effectively clean different
floors. Cleaning modes are selected using the Remote Control.
AUTO Cleaning Mode
1
This is the most commonly used mode.
In AUTO Cleaning Mode, DEEBOT SLIM
cleans in a straight line and changes
direction when it meets an obstacle.
3 Spot Cleaning Mode
(1.5-5 minutes)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT SLIM focuses on a specific
area to clean.
3. Operating and Programming
Edge Cleaning Mode
2
This mode is good for cleaning the edges
and corners of a room. In Edge Cleaning
Mode, DEEBOT SLIM cleans along a border
(e.g. wall).
4 Return to Charger Mode
When battery power gets low, DEEBOT SLIM
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
DEEBOT SLIM can also be sent back
*
to the Charging Dock at any time by
pressing the Return to Charger Button
on the Remote Control.
11
EN