Cleaning Mode Selection - ECOVACS DEEBOT SLIM2 DA5G Instruction Manual

3.3 Cleaning Mode Selection

DEEBOT has several cleaning modes to choose from to effectively clean different floors.
Cleaning modes are selected using the Remote Control or ECOVACS App.
AUTO Cleaning Mode
1
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in
a straight line and changes direction when it
meets an obstacle.
Spot Cleaning Mode
3
(1.5-5 minutes)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT focuses on a specific area
to clean.
3. Operating and Programming
Edge Cleaning Mode
2
This mode is good for cleaning the edges
and corners of a room. In Edge Cleaning
Mode, DEEBOT cleans along a border (e.g.
wall).
Return to Charger Mode
4
When battery power gets low, DEEBOT
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
DEEBOT can also be sent back to the
*
Charging Dock at any time by pressing
the Return to Charger Button on the
Remote Control.
13
FR-CA
EN