Vinten pro-touch Pro-10 System Maintenance Manual page 24

Contents
(20.3)
(20)
(20.4)
(20.5)
(20.6)
(20.3)
(20.7)
(20.8)
(20)
(20.8)
(20.4)
(20.5)
(20.6)
Earlier clamp - two grubscrews
Fig 4.4 'Pozi-Loc' tripod leg - bottom clamp adjustment
16 Adjust an earlier clamp as follows
16.1 Replace the clamp knob
16.2 Using a 2.5 mm hexagonal wrench, remove the locking grubscrew
16.3 Using a 2.5 mm hexagonal wrench, slacken the adjusting grubscrew
move under its own weight.
16.4 With the knob still in Position 2, slide the leg in and out and gradually tighten the adjusting
grubscrew (20.7)
IDENTIFICATION
GROOVE
(Fig 4.4):
(20) and rotate to position 2.
until the clamp begins to grip.
First
Page
POSITION 1
(20.3)
(20.9)
(20)
(20.4)
(20.5)
(20.6)
Later clamp - One grubscrew
Previous Next
Page Page
90°
(20.8) from the shaft (20.3).
(20.7) until the leg is free to
Previous
View
24