Pan Brake Knob Adjustment - Vinten pro-touch Pro-10 System Maintenance Manual

Contents
Adjustments

Pan brake knob adjustment

9 Because its movement is restricted, the pan brake knob
use.
10 To adjust the pan brake knob
10.1 Remove the securing screw
10.2 Turn the shaft
10.3 Install the knob
10.4 Turn the knob fully counter-clockwise and ensure the brake is released. Turn the knob clockwise
and ensure the brake is applied before the knob reaches the end of it travel.
10.5 Readjust as necessary and secure the knob with the screw (11.1).
(11.1)
(11)
(11.2)
Fig 4.2 Pan brake knob and camera slide plate knob adjustment
(Fig 4.2):
(11.1) and pull the knob
(11.2) clockwise until the pan brake is fully applied.
(11) on the shaft (11.2)
First
Page
(11) may require adjustment after prolonged
(11) off the shaft (11.2).
approximately at right angles to the body of the head.
Previous Next Previous
Page Page View
(7.2)
(7)
(7.1)
21