Passenger Seat - Triumph Tiger 850 Sport Owner's Handbook Manual

Passenger Seat

Warning
The rider's seat is only correctly
retained and supported once the
passenger seat is correctly installed.
Never ride the motorcycle with the
passenger seat detached or removed,
as the rider's seat will not be secure
and may move.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat
upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
The passenger seat must be removed
before the rider's seat can be removed.
There is also
compartment located
passenger seat, see page 102.
and pull firmly
a small storage
beneath the
GENERAL INFORMATION
Passenger Seat Removal
To remove the passenger seat:
▼ Insert the ignition key into the seat
lock, see page 96.
▼ Turn the
counterclockwise
down on the rear of the seat. This
will release the seat from its lock and
allow it to be slid rearwards.
▼ If equipped with heated seats, rotate
the passenger seat and rest it on the
rider's seat. Disconnect the heated
seat's electrical connector.
▼ Remove the
motorcycle.
1. Electrical connector
2. Clip
3. Heated passenger seat
ignition key
while pressing
seat from the
3
2
1
97