Disassembly and Reassembly
No
Parts
3
Ass'y Evap
136
Procedure
2) Disassemble the Bracket Outlet Sub that fixes the
Drain Pan equipped on the front of the set.
– Unscrew 6 screws
3) Disassemble the Drain Cushion from the
set.
The Evaporator should be disassembled after
disassembling the Cover Control 1-3) and the
Drain Pan 2-1), 2-2), 2-3).
1) Disassemble the Cover Pipe that fixes the high/
low pressure Pipe.
– Unscrew 2 screws
2) Disassemble the refrigerant temperature sensor,
Inlet air temperature sensor, and EEV wire that
connected to the inside of PCB.
Remark
Samsung Electronics