Page 1
Technical Data Book MAX (Wall mounted) for Europe (R410A, 50Hz, HP/HR) Model : AM093MNQDEH/EU...
Page 2
History Version Modification Date Remark Ver.1.0 Release MAX (Wall Mounted) TDB ’17. 03. 15 Modify the Accessory Compatibility table for MCU kit(P33) Ver.1.01 ’17. 09. 13...
Page 3
Nomenclature Indoor Unit Model Name Buyer (1) Classification (5) Product Notation 1 Way Cassette 4 Way Cassette (600x600) 4 Way Cassette, 360 Cassette LSP Duct (2) Capacity MSP Duct Ceiling X 1/10 kW (3 digits) Console RAC (with EEV) RAC (without EEV) A3050 (Wall Mounted) (3) Version 2014...
Page 4
Features & Benefits TURBO Cooling mode Samsung's air conditioner operates in its maximum speed in Turbo Cooling mode to quickly reach the set temperature. Instantly cool down your space with Samsung's Turbo Cooling technology. Full HD Filter Full HD 80 Filter filtrates dust particles by up to 80%.
1. Specification MAX (Wall Mounted ) Type WALL MOUNTED Model Name AM093MNQDEH/EU Φ, #, V, Hz Power Supply 1,2,220-240,50 Mode HP / HR Cooling Btu/h 31,700 Performance Capacity Heating Btu/h 33,400 Cooling Power Input Heating Cooling 0.47 Power Current Input Heating 0.54...
2. Summary Table MAX (Wall Mounted ) Performance Characteristics Capacity (kW) Sound Pressure Sound Power Airflow (CMM) Model Code (dBA) (dBA) Speed Cooling Sensible Heating High AM093MNQDEH∗∗ NOTE • Sound data is based on cooling operation. Electrical Characteristics Power Supply Power Input (W) Current Input (A) MCA (A)
4. Dimensional Drawing MAX (Wall Mounted ) AM093MNQDEH∗∗ Unit: mm (inch) 1280 (50-3/8) (9-15/16) Knockout hole for Knockout hole for left piping right piping 1530 (60-1/4) (14-5/16) (6-1/8) Φ65 Φ65 (2-9/16) (2-9/16) 64 (2-9/16) Wall hole for right rear piping (4-15/16) Wall hole for right rear piping...
7. Sound Data MAX (Wall Mounted ) Sound Pressure level Unit: dB(A) Model High AM093MNQDEH∗∗ Microphone • NR Curve 1) AM093MNQDEH∗∗ NR 75 NR 70 NR 65 NR 60 High NR 55 NR 50 NR 45 NR 40 NR 35 NR 30 NR 25 NR 20...
Page 14
6. Electrical Wiring Diagram MAX (Wall Mounted ) Sound Power level NOTE Unit: dB(A) • Specifications may be subject to change without prior notice Model Power - Sound power level is an absolute value that a sound source AM093MNQDEH∗∗ generates. - dBA = A-weighted sound power level.
8. Temperature and air flow distribution MAX (Wall Mounted ) AM093MNQDEH∗∗ Discharge angle : 27 1) Cooling air velocity distribution 2) Cooling Temperature distribution 3) Heating air velocity distribution 4) Heating Temperature distribution...
10. Installation Installing the drain hose When installing the drain hose for the indoor unit, check if condensation draining is adequate. When passing the drain Selecting the installation location hose through the 65-mm hole drilled in the wall, check the following: Indoor Unit •...
Page 18
10. Installation Connecting the power and communication cables 1 Before wiring work, you must turn off all power source. 2 Indoor unit power should be supplied through the breaker 100mm (ELCB or MCCB+ELB ) separated by the outdoor power. • ELCB:Earth Leakage Circuit Breaker 6 Connect the earth cable to the plate on the evaporator as •...
Page 19
10. Installation Specification of electronic wire Power supply MCCB ELB or ELCB Power cable Earth cable Communication cable XA, 30 mmA, 0.1 s 2.5 mm2 2.5 mm2 0.75~1.5 mm2 Max : 242V / Min : 198V • Refer to the unit nameplate for rating current. •...
Page 20
10. Installation CAUTION 1 Remove batteries from the remote control. 2 Insert batteries and enter the option setting mode while • Select the power cable in accordance with relevant local and pressing (High Temp button) and (Low Temp button). national regulations. 3 Check if you have entered the option setting status.
Page 21
10. Installation Option setting Status 1 Setting SEG2, SEG3 option a Press Low Fan button( ) to enter SEG2 value. b Press High Fan button( ) to enter SEG3 value. Each time you press the button, will be selected in rotation. SEG2 SEG3 2 Setting Cool mode...
Page 22
10. Installation Option setting Status 8 Setting Heat mode Press Mode button to be changed to Heat mode in the ON status. 9 Setting SEG11, SEG12 option a Press Low Fan button( ) to enter SEG11 value. b Press High Fan button( ) to enter SEG12 value. Each time you press the button, will be selected in rotation.
Page 23
10. Installation Option setting Status 16 Setting Fan mode Press Mode button to be change to Fan mode in the OFF status. 17 Setting SEG21, SEG22 option a Press Low Fan button( ) to enter SEG21 value. b Press High Fan button( ) to enter SEG22 value. Each time you press the button, will be selected in rotation.
Page 24
10. Installation Setting an indoor unit address (MAIN/RMC/MCU port) 1 Check whether power is supplied or not. – When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2 Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan. 3 Assign an indoor unit address by wireless remote controller.
Page 25
10. Installation Setting an indoor unit installation option (suitable for the condition of each installation location) 1 Check whether power is supplied or not. – When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2 Set the installation option according to the installation condition of an air conditioner.
Page 28
Operation Mode MCM-C200 Selection Switch Others Module Controller MCM-A00N CHILLER Only CHILLER FCU Interface MIM-F10N CHILLER Only CHILLER Module NOTE • In case you want more information about the accessories, please refer to the control and accessories TDB on pvi.Samsung.com site.
Page 29
DVM, CAC Test run Solution External Room Sensor MRW-TA MRW-TA DVM, CAC Others Operation Mode Selection Switch MCM-C200 MCM-C200 NOTE • In case you want more information about the accessories, please refer to the control and accessories TDB on pvi.Samsung.com site.
Page 30
MXD-E32K200A MXD-E24K232A MXD-E24K300A 3 Indoor MXD-E32K224A MXD-E32K300A MXD-A38K2A 8~12 HP MXD-A12K2A 14~16 HP PDM KIT MXD-A58K2A 18~26 HP NOTE • In case you want more information about the accessories, please refer to the control and accessories TDB on pvi.Samsung.com site.
Page 32
MCM-D201N A64K100E A64K100E A64K100E A64K100E MXD-A64K100E X 1 EA X 2 EA X 3 EA X 4 EA NOTE • In case you want more information about the accessories, please refer to the control and accessories TDB on pvi.Samsung.com site.
Page 33
5Hp's AHU MXD-K075AN only for 7.5Hp's AHU AHU-KIT MXD-K100AN only for 10Hp's AHU only for 10~40Hp's MCM-D201N NOTE • In case you want to know more information the accessories, please refer to the control and accessories TDB on pvi. samsung.com site...
Page 34
Ver. 1.01 Samsung Electronics Co., LTD. B2B PM / SE Head Office (Suwon Korea) 129, Samsung-Ro, Yeongtong-Gu, Suwon City, Gyeonggi-Do, Korea 16677 Website : www.samsung.com, http://btsp.samsunggsbn.com Email : airconditioner@samsung.com Images and data in this book may subject to change without prior notice.