Download  Print this page

Honeywell HWF2V-COM Installation And Setup Manual page 16

Commercial fire communicator
Hide thumbs

Advertisement

[E]
Operating with 3G service (Applies to HWF2A ONLY)
RAT RSCP
3G
-xxx
-xxxxxx
RSCP MIN
xxxx xxxx
Cntry Netw
xxx
xxx
Cell
Chan
xxxxxx xxxx
Second Site RSSI
Available
[F]
Testing Gateway
Redir 1
Signal Display for 3G
EC/No
RAT – Radio Access Technology.
RSCP –Received Signal Code Power
Ec/N0 – Carrier Noise Ratio (CNR)
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Min/Max Signal Display for LTE
MAX
RSRP – Current Reference Signal Received Power
xxxx
MIN – Minimum Receive Signal Level
MAX – Maximum Receive Signal Level
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Location Display for 3G
LAC
Cntry – Country Code
xxxxx
Netw – Network Code
LAC – Local area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Cell Display for 3G
PSC
Cell – Global Cell ID
xxx
Chan – Control Channel in use
PSC – Primary Sync Code
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
3G Status Display Screen 5
Secondary Site RSSI availability. Available or Not Available
will be displayed.
Press the [space] key to go to Status Display Screen 1.
Press the [backspace] key to go to the previous field.
Run Network
Performs a set of network diagnostics that tests the integrity of
the links between the communicator and the various connec-
tion points (Redirs) to AlarmNet. Refer to Section 6: Network
Diagnostics.
14
Test
Diagnostic

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell HWF2V-COM

This manual is also suitable for:

Hwf2a-com