Download  Print this page

Running Network Diagnostics - Honeywell HWF2V-COM Installation And Setup Manual

Commercial fire communicator
Hide thumbs

Advertisement

Running Network Diagnostics

(available only if the communication path includes IP)
The network diagnostic process tests the integrity of the links between the communicator and the various
connection points of AlarmNet Control that are known as "Redirects" (Redirs or RDR).
To initiate the network diagnostics, press the [F] key on the 7720P Programming Tool.
NOTE: The test is performed ONLY if a physical link is detected. If no physical link is detect-
If a physical link is detected, the diagnostics are performed. The following shows the progression of the test:
Testing Redir 1
Testing Redir 2
Reached Gateway
Redir 1
Service OK
Testing Redir 2
Redir 2
Service OK
Testing Redir 3
Redir 3
Service OK
RDR1 RDR2 RDR3
OK
ed, the test is aborted and the following is displayed:
The first step of the test traces the connection to Redir 1 at AlarmNet
Control.
A successful trace to Redir 1 is indicated here. See below for possible
errors that may occur at this stage of testing.
The service at AlarmNet Control on Redir 1 is functioning. See below
for possible errors that may occur at this stage of testing.
The first step of the test traces the connection to Redir 2 at AlarmNet
Control.
The service at AlarmNet Control on Redir 2 is functioning. See below
for possible errors that may occur at this stage of testing.
The first step of the test traces the connection to Redir 3 at AlarmNet
Control.
The service at AlarmNet Control on Redir 3 is functioning. See below
for possible errors that may occur at this stage of testing.
A summary of the tests is displayed after Redir 3 is tested. The exam-
ple shows that the tests of all three connection points, or Redirs, were
OK
OK
successful. If an error occurred at any point, the summary will display
"FAIL" under the faulty Redir.
NO PHYSICAL LINK
16

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell HWF2V-COM

This manual is also suitable for:

Hwf2a-com