Download  Print this page

Honeywell HWF2V-COM Installation And Setup Manual page 28

Commercial fire communicator
Hide thumbs


The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Man-
ual. Unauthorized changes or modifications could void the user's authority to operate the equipment.
This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement
for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the
manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with
the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not oc-
cur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna until interference is reduced or eliminated.
Move the radio or television receiver away from the receiver/control.
Move the antenna leads away from any wire runs to the receiver/control.
Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired opera-
Responsible Party / Issuer of Supplier's Declaration of Conformity: Ademco Inc., a subsidiary of Resideo Technologies,
Inc., 2 Corporate Center Drive., Melville, NY 11747, Ph: 516-577-2000
Warning – The antenna(s) used by this product must be installed to provide a separation distance of at least 7.8 in. (20
cm) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in
accordance with FCC multi-transmitter product procedures.
The product should not be disposed of with other household waste. Check for the nearest authorized collection
centers or authorized recyclers. The correct disposal of end-of-life equipment will help prevent potential
negative consequences for the environment and human health.
Documentation and online support: Please go to
Contact Technical Support: (877) HPP-POWR, or Email us at
Warranty: For the latest warranty information, please go to:
800-24452 9/18 Rev B
RF Exposure
12 Clintonville Road,
Northford, CT 06472-1610 USA
 2018 Honeywell International Inc.


Table of Contents

  Related Manuals for Honeywell HWF2V-COM

This manual is also suitable for: