Download  Print this page

Powerboost1 Information - Honeywell HWF2V-COM Installation And Setup Manual

Commercial fire communicator
Hide thumbs

Advertisement

PowerBoost1 Information

LED Indicator
AC (green)
ACTIVE (green)
LOW BATT (yellow)
TROUBLE (yellow)
NOTES:
If AC power is lost and the battery voltage falls below 10v, the PowerBoost1 output voltage will be turned off.
The output power is turned back on when AC power is restored.
You must use the DIP switch settings shown below.
STATUS
AC power available.
Cyclical flashing – normal communications.
Repetition of 3 flashes – loss of communications.
Missing or low battery.
One or more trouble conditions exist, such as; overload, output supervision,
ground fault, or charger failure.
18

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell HWF2V-COM

This manual is also suitable for:

Hwf2a-com