Konica Minolta CA-410 Instruction Manual page 2

„ Safety Symbols
„
The following symbols are used in this manual to prevent accidents that may occur because of incorrect use of the
instrument.
Denotes an instruction regarding a safety warning or note.
Read the instruction carefully to ensure safe and correct use.
Denotes an instruction regarding the risk of electric shock.
Read the instruction carefully to ensure safe and correct use.
Denotes an instruction regarding the risk of fire.
Read the instruction carefully to ensure safe and correct use.
Denotes a prohibited operation.
The operation must never been performed.
Denotes an instruction.
This instruction must be strictly adhered to.
Denotes an instruction.
Be sure to disconnect the plug from the outlet.
Denotes a prohibited operation.
Never disassemble the instrument.
This symbol indicates alternating current (AC).
This symbol indicates direct current (DC).
This symbol indicates class II protection against electric shock.
Notes on this Manual
• Copying or reproduction of all or part of the contents of this manual without the permission of KONICA MINOLTA is
strictly prohibited.
• The contents of this manual are subject to change without prior notice.
• Every effort has been made in the preparation of this manual to ensure the accuracy of its contents. However, should you
have any questions or find any errors, please contact your retailer or a KONICA MINOLTA-authorized service facility.
• KONICA MINOLTA will not accept any responsibility for consequences arising from the use of the instrument.
Formal designations of application software used in this manual
(Designation in this manual) (Formal designation)
Bluetooth
Trademarks
• The Bluetooth® mark and logo are registered trademarks of The Bluetooth SIG, Inc. and are used under license.
• The KONICA MINOLTA logo and symbol marks are registered trademarks of Konica Minolta, Inc.
Bluetooth®