0623 [Z-Fold Skew Correction]; 0624 [Amount Of Z-Fold Skew Correction]; 0625 [Amount Of Z-Fold Skew Correction: Reverse] - Ricoh PRO C7200 Operating Instructions Manual

0623 [Z-fold Skew Correction]

Select way to correct skew during Z-folding. [No] makes no correction. [Yes] corrects by striking. [On:
Reverse (Default)] corrects by both striking and reverse rotation of Regist. Roller.
Setting Item
[Setting]

0624 [Amount of Z-fold Skew Correction]

Adjust striking amount of paper during Z-folding skew correction. It is used when side effects occur. The
initial setting of paper striking is 9mm and becomes 0mm by setting [-9].
Setting Item
[Setting]

0625 [Amount of Z-fold Skew Correction: Reverse]

Adjust the reverse rotation amount of Registration Roller during Z-folding Skew Correction. It is used
against side effects. The initial setting is 3mm and becomes 0mm by setting [-3].
Values
[Off]
[On]
[On: Reverse (Default)]
Default Max.
Value Value
0.0 0.0
[Finishing: Finisher]
Default Value
[On: Reverse (Default)]
Min.
Step
Value
-9.0 0.5
Unit
mm
65