Download Print this page

Keysight Technologies EXA Installation Note page 22

Signal analyzer option exm, external mixing upgrade kit
Hide thumbs Also See for EXA:

Advertisement

Option EXM, External Mixing Upgrade Kit
3. In the upgrade kit, locate the Warning Label, N9030-80018.
4. Refer to Appendix Figure 17, "Add Warning Label to Top Brace,". Attach the Warning Label to
the top brace as shown.
5. Locate the 50 Ohm SMA termination in the kit, part number 1810-0118. Attach the SMA
termination to the front panel EXT MIXER connector.
Figure 17
Add Warning Label to Top Brace
22
Installation Note N9010-90041

Advertisement

loading