Advertisement
Front Frame Assembly Removal
Make sure any connectors on the front panel are removed.
NOTE
1. Refer to Appendix Figure 5, "Front Frame Removal,". Using the T-10 driver, remove the eight
screws (1) (0515-1035), four on each side, to detach the Front Frame Assembly from the
chassis.
2. Refer to Appendix Figure 6, "Front Panel Cable,". Pull the Front Frame Assembly carefully away
from the chassis. Remove the ribbon cable W1 from the motherboard. The cable has locking
tabs on each side, pinch and pull to release.
W1 may have locking springs on each side. Depress the spring on each side of
NOTE
the connector to remove from the motherboard.
Figure 5
Front Frame Removal
Installation Note N9010-90041
Option EXM, External Mixing Upgrade Kit
13
Advertisement
