Keysight Technologies EXA Installation Note page 10

Option EXM, External Mixing Upgrade Kit
Option PRC
1. Disconnect the instrument from ac power.
2. Refer to Appendix Figure 2, "Bail Handle Removal,". Using the T-20 driver, remove the four
screws (two on each side) (1) that hold the bail handle (2) to the front frame.
Figure 2 Bail Handle Removal
3. Using the T-20 driver, remove the four screws (two on each side) (6) that hold the strap
handle plugs (5) in place.
10 Installation Note N9010-90041