Komatsu Galeo PC27MR-2 Operation & Maintence Manual page 70

DETAILED CONTROLS AND GAUGES
Work Equipment Control Lever
The operating pattern is set to the standard operating pattern (ISO
pattern).
When changing the operating pattern, please contact your Komatsu
distributor.
The method of using operating patterns other than the ISO pattern is
given in the ATTACHMENT AND OPTIONS section. Always read and
understand the contents before operating the machine.
When changing the operating pattern, change the operating plate at the
same time to the operating plate that matches the movement of the
machine.
The place to attach the operating plate is on the right side of the
operator's cab.
A: Machine equipped with canopy
B: Machine equipped with cab
This left work equipment control lever (2) is used to operate the arm
and upper structure.
Swing operation
(a) Swing to right
(b) Swing to left
Arm operation
(c) Arm IN
(d) Arm OUT
N (Neutral): The upper structure and arm are held in that position
when they come to a stop and do not move.
This right work equipment control lever (3) is used to operate the
arm and upper structure.
Boom operation
(e) RAISE
(f) LOWER
Bucket operation
(g) DUMP
(h) CURL
N (Neutral): The boom and bucket are held in that position when
they come to a stop and do not move.
3 - 18
WARNING
OPERATION