OPERATION
OPERATION
5. When loading, set the work equipment at the front and the
blade at the rear, with the undercarriage and upper structure
set parallel.
6. Before moving onto the ramps, make sure that the machine is
positioned in a straight line with the ramps and that the
centerline of the machine matches that of the trailer.
Align the direction of travel with the ramps and travel slowly.
Lower the work equipment as far as possible without causing
interference.
When on the ramps, operate only the travel lever. Do not
operate any other lever.
7. Stop the machine at the specified place, then swing the upper
structure slowly 180°.
8. Load the machine at the specified position on the trailer or
truck.
TRANSPORTATION
TRANSPORTATION
3 - 93