Komatsu Galeo PC27MR-2 Operation & Maintence Manual page 115

OPERATION
Moving Machine Forward
1. Set lock lever (2) to the FREE position, then raise the work
equipment 40 to 50 cm (16 to 20 in) from the ground.
2. Raise the blade.
3. Opearate the both travel levers (3) as explained below.
When the sprocket (A) is at the rear of the machine.
Push the both travel levers (3) forward slowly to move the
machine off.
When the sprocket (A) is at the front of the machine.
Pull the both travel levers (3) backward slowly to move the
machine off.
4. Switch the travel speed as follows.
When the travel speed selector switch (4) is pressed, the
travel speed can be switched between high speed and low
speed.
Each time the switch is pressed, the travel speed is
switched between low speed and high speed.
MACHINE OPERATIONS AND CONTROLS
3 - 63