Komatsu Galeo PC27MR-2 Operation & Maintence Manual page 39

SAFETY SAFETY
To make it easier to escape if there is any problem, set the
tracks at right angles to the road shoulder or cliff with the
sprocket at the rear when carrying out operations.
Do not carry out demolition work under the machine. There is a
hazard that the machine may become unstable and tip over.
When working on or from the top of buildings or other structures,
check the strength and the structure before starting operations.
There is a hazard of the building collapsing and causing serious
injury or damage.
When carrying out demolition work, do not carry out demolition
above your head. There is a hazard of broken parts falling or of
the building collapsing and causing serious injury or property
damage.
Do not use the impact force of the work equipment for breaking
work. There is a hazard of damage to the work equipment, or a
hazard of serious personal injury being caused by flying pieces
of broken materials, or of the machine tipping over due to
reaction from the impact.
Generally speaking, the machine is more liable to overturn when
the work equipment is at the side than when it is at the front or
rear.
When using a breaker or other heavy work equipment, there is a hazard of the machine losing its balance and
tipping over. When operating on flat ground as well as on slopes.
Do not suddenly lower, swing, or stop the work equipment.
Do not suddenly extend or retract the boom cylinder. There is a hazard that impact will cause the machine to
tip over.
Do not pass the bucket over the head of other workers or over the operator's seat of dump trucks or other hauling
equipment. The load may spill or the bucket may hit the dump truck and cause serious injury or property damage.
SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION
2 - 25