Table of Contents
Advertisement
SECTION 6,
continued
Figure 7
RS232 Cable Connector
1. Connect the RS232 cable to the meter by lining up the holes
in the cable connector with the pins of the serial port.
2. Connect the cable to the printer in the same manner (see
Figure 7).
3. Once the communication link is established, press
send data to the computer.
Note: For optimum performance and ESD protection, use a
five-conductor shielded cable. Use a metal shell for the printer or
computer terminal connector, and connect the shield of the cable to
the metal shell and the sleeve (signal ground) of the RS232 plug.
Follow the manufacturers instructions to configure the
printer for compatibility with the meter.
52
to
PRINT
Advertisement
Table of Contents
