Setting The Date; Setting The Year - Hach sension8 Manual

SECTION 3,
continued

3.1.8 Setting the Date

3.1.9 Setting the Year

This setup feature is used to set the date in the instrument. To
change the value:
1. Press the
SETUP
2. Press the
UP ARROW
the upper right hand corner of the display and the Date icon
will appear. The current date entry will be displayed at the
bottom of the display.
3. Press the key to leave the value unchanged. To change
EXIT
the value, press the
appear in the lower display.
4. Use the number keys to enter the date. Press the
after entering the desired date. Press the
will return to the Read Mode.
This feature is used to set the year in the instrument. To change
the value:
1. Access the setup mode by pressing the
2. Press the
UP ARROW
the upper right hand corner of the display and the date icon
will appear. The current year entry will appear in the main
display.
3. Press the key to leave the value unchanged. To change
EXIT
the value, press the
appear in the lower display.
4. Use the number keys to enter the year. Press the
and then the
EXIT
The meter will return to the Read Mode.
28
key to access the setup mode.
seven times. An
key. The number pad icon will
ENTER
eight times. A
9
key. The number pad icon will
ENTER
key when the desired year has been entered.
will begin flashing in
8
key
ENTER
key. The meter
EXIT
key.
SETUP
will begin flashing in
key
ENTER