Section 4 Storing And Recalling Data; Storing Measurements - Hach sension8 Manual

SECTION 4

4.1 Storing Measurements

STORING AND RECALLING DATA
ion
The sens ™8 meter can store up to 99 measurement readings.
Data must be stored to recall it for later review, downloading, or
printing. Although the meter display will only show the
temperature, data location, and dissolved oxygen value, the
following information is stored (and can be downloaded or
printed) for each sample:
•
An asterisk (*) indicates an unstable value was stored.
•
Storage location
•
Sample concentration in mg/L
•
Sample concentration in % saturation
•
Calculated true barometric pressure
•
Temperature
•
Sample salinity
•
Date
•
Time
•
Instrument serial number
•
Software version
The new data is saved in the next available memory location,
numbered from 1 to 99. If no memory locations higher than the
current one are available, the meter will "wrap around" and
choose the next available location. The user also has the option of
choosing the storage location.
To store data:
1. After the measurement reading has stabilized, press
The display will prompt
available location). The question mark will be flashing.
45
(# is the next
Store Sample #?
.
STORE