Setting The Time - Hach sension8 Manual

SECTION 3,
continued

3.1.7 Setting the Time

Entering the meter altitude
When the meter is received from the factory, the default altitude is
0 meters. To change the value:
1. Access the setup mode by pressing the
2. Press the
UP ARROW
upper right hand corner of the display and the current altitude
entry will be displayed.
3. To change the value, press the
icon will appear in the lower display.
4. Use the number keys to enter the altitude or press the
key to leave the value unchanged. Press the
then the key when the desired altitude has been entered.
EXIT
The meter will return to the Read Mode. The displayed dissolved
oxygen in % saturation will be adjusted according to this entry.
This feature sets the clock in the instrument using military time.
For example, 3:00 p.m. is entered as 15:00. To change the value:
1. Access the setup mode by pressing the
2. Press the
UP ARROW
upper right hand corner of the display. The Time icon will
appear. The current time entry will be displayed.
3. To change the time, press the
icon will appear in the lower display.
4. Press the key to leave the value unchanged. Use the
EXIT
number keys to enter the time. Press the
key when the desired time has been entered.
EXIT
The meter will return to the Read Mode.
27
SETUP
five times. A will begin flashing in the
6
key. The number pad
ENTER
SETUP
six times. A will begin flashing in the
7
key. The number pad
ENTER
ENTER
key.
EXIT
key and
ENTER
key.
key, then the