Calibration Review - Hach sension8 Manual

SECTION 3,
continued

3.3.7 Calibration Review

4. Press the
ENTER
showing .
100%
5. Press the
ENTER
the meter completes the calibration.
6. When the calibration is complete, the meter will return to the
Read Mode. Press the
sequence to back out of the calibration routine, one screen
one-at-a-time, without completing a calibration.
To review the last calibration:
1. Press the
REVIEW
last calibration will show.
2. Press the key on the keypad to view the time of the
TIME
last calibration.
3. Press the
UP ARROW
calibration will show.
4. Press the
CONC %
values of calibration.
5. Press the
UP ARROW
calibration will show.
6. Press the
UP ARROW
will show.
7. Press the
UP ARROW
will show. Press the
38
key three times to skip to the display
key. The stabilizing icon will appear while
key during the calibration
EXIT
key on the keypad. The date and year of the
. The dissolved oxygen concentration of
key to view the % saturation and mg/L
key. The barometric pressure entry of
key. The altitude entry of calibration
key. The salinity entry of calibration
key to leave the calibration review.
EXIT