Thermoplan BLACK&WHITE 3 Series User Manual page 25

User display messages
Display messages
Piston error
Overtime error
NTC coffee
NTC Foamer
© 2009 by Thermoplan AG , Subject to change
User Manual CT / CTS / CTMcool
What?
1. Reselect any beverage
2. If not OK => contact service
• Coffee extraction time IS too slow, (grind adjustment may be too fine)
1. Press Cleaning key
2. Repeat process
• Water flow blocked
1. Check
2. => contact service
• CPU does not receive signal from NTC sensor on coffee boiler
1. => contact service
• CPU does not receive signal from NTC sensor on Foamer heating
1. => contact service
If for any reason the machine had to be turned off,
wait at least for 10 sec. before turning on again!
805.012_REV-1_EN
25