Modifying The Superheating Set Point; Viewing Parameters Of Level Pr1 - Emerson Dixell IEV22D Manual

3.7 Modifying the superheating set point

Proceed as follows to modify the superheating set point:
•
press SET for 5 seconds
•
the superheating set point of valve 1 flashes
•
press
•
press SET to confirm the value
•
the superheating set point of valve 2 (if present) flashes
•
press
•
press SET to confirm the value and return to the normal display

3.8 Viewing Parameters of level Pr1

Proceed as follows to view the parameters:
•
press SET and simultaneously for 5 seconds
•
press
•
press SET and
1592026260 IEV22-24D GB r.1.0 21.02.2019
to modify the superheating set point
to modify the superheating set point
to view the desired parameter
simultaneously to exit from viewing the parameters
IEV 13/60