Emerson Dixell IEV22D Manual page 15

How to modify visibility level
To modify the visibility lev of a parameter from Pr1 to Pr2 or from Pr2 to Pr1 is necessary:
•
enter programming parameters level Pr2
•
select the parameter
•
push SET key and hold it down then press
•
if the dot point on parameter label is lighted, it means that the parameter is visible also in
Pr1 visibility level
•
repeat above procedure to make the parameter visible or not in Pr1 level
1592026260 IEV22-24D GB r.1.0 21.02.2019
Parameter displayed also in Pr1
key
IEV 15/60