Table of Contents

Advertisement

100XT Operator's Manual

50 Hour

50 Hour
Task
Check hydraulic hoses
Change hydraulic pressure filter
Check Hydraulic Hoses
To help avoid injury:
Use a piece of cardboard or wood, rather than hands, to search for leaks.
Wear protective clothing, including gloves and eye protection.
Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
Lower, block, or support any raised component with a hoist.
Cover connection with heavy cloth and loosen connector nut slightly to relieve residual pressure.
Catch all fluid in a container.
Before using system, check that all connections are tight and all lines are undamaged.
If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
Check hydraulic hoses for leaks.
76 - Service
Notes
initial change
Pressurized fluid or air could pierce skin and cause
severe injury. Refer to operator's manual for proper use.

Advertisement

Table of Contents
loading

Table of Contents