Guidelines - Hammerhead 100XT Operator's Manual

100XT Operator's Manual

Guidelines

Guidelines
When you see this safety alert sign, carefully read and follow all instructions.
YOUR SAFETY IS AT STAKE. Read this entire section before using your equipment.
SAVE THESE INSTRUCTIONS.
Follow these guidelines before operating any jobsite equipment:WARNING—When using this product,
basic precautions should always be followed, including the following:
• Complete proper training and read operator's manual before using equipment.
• Mark proposed path with white paint and have underground utilities located before working. In the US
or Canada, call 811 (US) or 888-258-0808 (US and Canada). Also contact any local utilities that do not
participate in the One-Call service. In countries that do not have a One-Call service, contact all local
utility companies to have underground utilities located.
• Classify jobsite based on its hazards and use correct tools and machinery, safety equipment, and work
methods for jobsite.
• Mark jobsite clearly and keep spectators away.
• Wear personal protective equipment.
• Review jobsite hazards, safety and emergency procedures, and individual responsibilities with all
personnel before work begins. Safety Data Sheets (SDS) are available at
www.hammerheadshop.com/resources/technical-sheets/.
• Fully inspect equipment before operating. Repair or replace any worn or damaged parts. Replace
missing or damaged safety shields and safety signs. Contact your HammerHead
assistance.
• Use equipment carefully. Stop operation and investigate anything that does not look or feel right.
• Do not operate unit where flammable gas may be present.
• Only operate equipment in well-ventilated areas.
• Contact your HammerHead dealer if you have any question about operation, maintenance, or
equipment use
14 - Safety
®
dealer for