Hammerhead 100XT Operator's Manual page 69

100XT Operator's Manual
Disconnect Hoses
Disconnect Hoses
To help avoid injury:
• Always connect return line first and remove last.
• Before using system, check that all connections are tight and all lines are undamaged.
If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
1. Disconnect the pressure line (2) from the
bursting unit.
2. Disconnect the return line (1) from the
bursting unit.
3. Wrap hoses around the hooks on the power
unit.
68 - Complete the Job
Pressurized fluid or air could pierce skin and cause
severe injury. Refer to operator's manual for proper use.
Hot parts may cause burns. Do not touch until cool or
wear gloves.