ACME Diamonds LS-1010 RGB User Manual page 6

DMX Functions
Press the knob when the DMX FUNCTIONS show on the display, use the knob to select DMX Address,
DMX state or Exit. Enter DMX Address, turn the knob to change the address, press the knob to confirm.
Enter DMX State, select the HOLD/Black Out/Show Mode, when select Show Mode, the unit preference
to sound active. If the sound active function is closed, the unit will auto run built‐in show. ILDA signal
control prior to DMX signal control. Press EXIT to back to the menu.
Show Functions
Press the knob when the Show Functions show on the display, use the knob to select Show or Exit. Enter
Show, turn the knob to select show 0 to show 9, press the knob to confirm. (Show function only is valid
when select Show Mode in DMX functions.) SD card show prior to built‐in show. Press EXIT to back to
the menu.
Sound Functions
Press the knob when the Sound Functions show on the display, use the knob to select Sound Mode or
Sound Sense or Exit. Enter Sound Mode, use the knob to select On or off, press the knob to confirm.
ILDA signal and DMX signal control prior to sound active mode. Press EXIT to back to the menu.
5A