Advertisement
2. Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
ALWAYS turn off the system before hardware
installation/uninstallation.
ALWAYS unplug the power cord from the wall outlet/socket before
hardware installation/uninstallation.
ALWAYS touch a safely grounded object or metal object before
touching the device.
DO NOT touch any devices before the system is fully off.
DO NOT touch any electrical and semiconductor components on the device,
especially ICs on board.
2.1 Card Installation
A. Step 1: Turn off the system and unplug power cord from wall outlet/socket
B. Step 2: Remove the computer system case cover
C. Step 3: Plug SC502N1 MC HDV into an available Mini PCIe slot on motherboard
2.2 Signal Source Connection
Connection Diagram
This information contained herein is the exclusive property of ADVANTECH and shall not be distributed, reproduced, or disclosed in whole or in part
without prior written permission of ADVANTECH.
5/6
Advertisement
